Removing And Installing Activated Charcoal Filter System - Skoda OCTAVIA MK1 Service Manual

Compare the fuel rate with the specified
–
value.
* Minimum flow rate cm
** Voltage at fuel delivery unit when engine
not running and delivery unit operating
(approx. 2 volts less than battery voltage)

Removing and installing activated charcoal filter system

Activated charcoal filter system
1 -
solenoid valve 1 -N80-
Inspecting proper operation and
actuation: → 1.6 ltr./74 kW Motor, Simos
–
2 Injection and ignition system; Rep. Gr.
24; test fuel tank venting; test activated
charcoal filter system solenoid valve
2 - Connector
3 - Vent line
– from gravity valve
to remove, press release button at
–
connecting piece
4 - Throttle valve control unit
5 - Activated charcoal filter
with activated charcoal filter system
–
solenoid valve 1 -N80 -
Fitting location: in right of engine
–
compartment
to remove, first of all remove PAS
–
reservoir and press to the side
6 - Spring nut
3 /15 seconds
→ Itemto fuel tank
117