Skoda OCTAVIA MK1 Service Manual page 213

– Disconnect the plug from the intake air temperature sender.
Connect multimeter to intake air
–
temperature sender.
Temperature °C
– If the specified value is not reached, replace the intake air temperature sender.
If the specified value is reached, test wiring between sender plug and engine control unit
–
as follows:
Connect the test box -V.A.G 1598/22 - to the wiring loom of the engine control unit
–
→ Chapter.
-20
0
20
40
60
213
Resistance kΩ
approx. °13,8
approx. °5,5
approx. °2,4
approx. °1,1
approx. °0.6