Skoda OCTAVIA MK1 Service Manual page 179

Drive unit
Table of Contents

Advertisement

Note
t
Re display field 4:
The signal output from the pressure switch (field 4) at "compr. OFF" does not give any
t
information about the condition of the cooling medium in the air conditioning system
If the fault 01013 is entered in the fault memory, 25% is always displayed in the display
t
field 4.
Display group 098 (adaptation of throttle valve control unit):
When display group 098 is selected in function 04 "initiate basic setting", the engine control
unit is adapted to the throttle valve control unit - J338-.
The adaptation must always be performed after replacing or removing the engine control unit,
the throttle valve control unit or both components.
l
Engine runs in idling speed
Reading measured value
block 98
x.xx V
x.xx V
1
2
Voltage for throttle valve positioner potentiometer -G88- 2.28...4.75
Throttle valve potentiometer voltage -G69-
Note
t
Re display field 3:
Meaning of the digits in the 8-digit numerical block for the adaptation status of the throttle
t
valve control unit:
→ ← Readout on display
xxxxxxxx xx
3
4 ← Display fields
Operating condition of the adaptation
Adaptation status of the throttle valve
control unit
Meaning, if display positions = 1
179
Specificati
Analysis
on
00
→ Ancho
r
0000xxxx
→ Ancho
r
-
V
3.70...4.75
-
V

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents