head.
Unscrew left coolant flange at cylinder
–
head.
– Pull out coolant pipe towards the left.
– Remove cylinder head cover
Release the cylinder head bolts in the
–
order 1 to 10.
Remove cylinder head with cylinder head
–
gasket.
Inspecting the cylinder head for distortion
Special tools and workshop equipment required
t
Feeler gauge
t
Knife-edge straightedge
Test sequence
Inspect cylinder head at several points for
–
distortion using a knife-edge straightedge and
feeler gauge.
t max. permissible distortion: 0.1 mm
Reworking a cylinder head
Procedure
→
Chapter.
65