Remove further the bottom coolant hose
–
on the oil cooler -arrow- and drain
residual coolant.
Detach air guide hose at throttle valve
–
connection and at vent housing of the
crankcase ventilation -arrows-.
Detach vent hose -1- and unplug
–
connector from air mass meter -2-.
Unscrew bolts -3- and -4- and remove air
–
filter housing.
Rotate crankshaft to TDC cylinder 1
–
-arrow- (vehicles with manual gearbox).
TDC marking on flywheel and reference
mark must be aligned.
Marking on flywheel and reference mark
must be aligned.
63