connector from air mass meter -2-.
Unscrew screws -3- and -4-, remove air
–
filter box completely.
Remove wiper arms
–
Rep.- Gr. 92; windscreen wiper and
washer system
Remove the cooling water tank cover.
–
→ Body Work; Rep.-Gr. 66; Trim panels
Unplug the 28-pin connector at engine
–
control unit -J361-.
Open the cable duct below the air filter
–
unplug the 10-pin connector.
Detach wiring harness from the engine
–
and attach to the engine.
–
Unbolt earth strap -1-.
– Detach cables -3- and -4- at starter.
Separate plug connection -2- and pull out
–
of fixture.
Detach cables from fixture at starter and
–
lay to the side, unscrew the fixture.
Unbolt cable -1- of terminal 30/B+ at
–
alternator.
– Unplug connector -2- of terminal D+.
–
Unscrew cable lug -3-.
–
Detach cable from the fixture.
Unplug connector from monitoring switch
–
for coolant temperature sensor -F14-
(only for vehicles with air conditioning
system).
→ Electrical System
11