16 -
Gasket ring
–
replace
17 -
Screw plug - 100 Nm
18 -
Intermediate plate
–
inserted on sealing flange
– must be positioned on dowel sleeves
do not damage/bend during assembly
–
work
19 -
20 - Rear sealing flange with gasket ring
–
must be replaced completely
– must be positioned on dowel sleeves
– remove oil pan
– clean sealing surface before installing
the sealing flange with PTFE gasket ring
–
is supplied as a spare part
install gasket ring dry, the crankshaft
–
stub must be free of grease
fit new sealing flange with guide bushing
–
(do not pull guide bushing out of gasket
ring before fitting)
Installing intermediate plate
Insert intermediate plate on sealing
–
flange and push onto the dowel sleeves
-arrows-.
→ Fig.
15 Nm
→ Chapter
for removing
38