Detach air guide hose at throttle valve
–
connection and at vent housing of the
crankcase ventilation -arrows-.
Detach vent hose -1- and unplug
–
connector from air mass meter -2-.
Unscrew bolts -3- and -4- and remove air
–
filter housing.
Disconnect the vacuum line from the
–
brake servo unit.
–
Disconnect wiring/plug:
Plug for intake air temperature sender
1 -
-G42-
Unplug connector for throttle valve
2 -
control unit -J338-
–
Detach hose to the ACF tank.
– Unhook throttle control cable -arrows-.
Unscrew earth strap at cylinder head
–
cover.
Pinch off and disconnect 2 coolant hoses
–
for throttle valve supports with hose
clamps -MP 7-602- (first of all drain
pressure from cooling system).
Disconnect plug -1- from valve for
–
variable intake manifold changeover
-N156-.
–
Release vacuum hose -2-.
Release left and right retaining lugs at
–
collecting intake manifold -arrow-.
59