Skoda OCTAVIA MK1 Service Manual page 29

key -pos. 14-
12 - Toothed belt guard
13 -
14 - Woodruff key
– check tightness
15 - Hall sender -G40-
when bolting on, ensure base plate is
–
centered
16 -
17 - Rear timing belt guard
18 -
19 - Semi-automatic tensioning pulley
check semi-automatic tensioning pulley
–
→ Chapter
– Fitting position
20 - Coolant pump
– removing and installing
21 -
22 - Timing belt gear - crankshaft
there must not be any oil present on
–
contact surface between timing belt
sprocket and the crankshaft
– can be installed only in one position
90 Nm + torque a further
23 -
(90°)
– replace
counter-hold → Chapter
–
holder -T30004- or counterholder -MP 1-
310- for slackening and tightening
10 Nm
10 Nm
20 Nm
→ Fig.
→ Chapter
15 Nm
1 / turn
4
with counter-
29