Explanation Of The Table Headings In The Object Descriptions; Identity; Hex ); Table 87: Explanation Of The Table Headings In The Object Descriptions - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
11.2.5.3

Explanation of the Table Headings in the Object Descriptions

Table 87: Explanation of the table headings in the object descriptions

Table heading
Attribute ID
Access
NV
Name
Data type
Description
Default value
11.2.5.4

Identity (01

The "Identity" class provides general information about the fieldbus
coupler/controller that clearly identifies it.
Instance 0 (Class Attributes)

Table 88: Identity (01

Attribute ID
1
2
3
Description
Integer value which is assigned to the corresponded attribute
Set:
The attribute can be accessed by means of Set_Attribute services.
Response also possible with Get_Attribute service!
All the set attributes can also be accessed by means of
Get_Attribute services.
Get:
The attribute can be accessed by means of Get_Attribute services.
Get_Attribute_All:
Delivers content of all attributes.
Set_Attribute_Single:
Modifies an attribute value.
Reset:
Performs a restart.
0: Restart
1: Restart and restoration of factory settings
NV (non volatile):
The attribute is permanently stored in the controller.
V (volatile):
The attribute is not permanently stored in the controller.
Without specifying, the attribute is not saved!
If this column is missing, all attributes have the type V
(volatile).
Designation of the attribute
Designation of the CIP data type of the attribute
Short description for the Attribute
Factory settings
)
hex
) – Class
hex
Acces Name
s
Get Revision
Get Max Instance
Get Max ID number of
class attributes
Fieldbus Communication 169
Data type Description
UINT Revision of this object
UINT Maximum instance
UINT Maximum number of
class attributes
Default value
1 (0x0001)
1 (0x0001)
0 (0x0000)
Manual
Version 1.0.0