Table 104: Static Assembly Instances - Instance; Table 105: Static Assembly Instances - Common Service - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Instance 109 (6D
This assembly instance contains analog input data.
Table 104: Static assembly instances – Instance 109 (6C
Attribute ID
3
4
Instance 1 (01 hex) "Configuration"
This Instance can optionally be used in the "Configuration Path" of a connection if
the associated connection originator (for example the master) requires the
specification of a "Configuration Path". The data length of this Instance is always
zero.
Instance 198 (C6
This instance is used to establish a connection when no outputs are to be
addressed or when inputs, which are already being used in an exclusive owner
connection, are to be interrogated. The data length of this instance is always
zero.
This instance can only be used in the "consumed path" (seen from the slave
device).
Instance 199 (C7
This instance is used to establish a connection based on an existing exclusive
owner connection. The new connection also has the same transmission
parameters as the exclusive owner connection. When the exclusive owner
connection is cleared, this connection, too, is automatically cleared. The data
length of this instance is always zero.
This instance can only be used in the "consumed path" (from the point of view of
the slave device).
Common Service
Table 105: Static assembly instances – Common service
Service code Service
0E
hex
10
hex
)
hex
Acces Name Data type
s
Get Data ARRAY of octed
Get Size UINT
) "Input Only"
hex
) "Listen only"
hex
Service name
available
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate attribute
No Yes Set_Attribute_Single
Fieldbus Communication 175
)
hex
Description
Reference of the process
image: only analog input data
Number of bytes in Attribute 3
Description
Modifies an attribute value
Version 1.0.0
Default value
-
-
Manual