I/O Config; Table 55: Wbm Page „I/O Data - WAGO 750-363/0040-0000 Manual

134 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9.16

I/O Config

Click the link "I/O config" to view the number of modules that are connected to
your hardware.
The data in the second line are not relevant for the present fieldbus coupler,
because no I/O configuration will be load onto devices which have no runtime
system (PLC). Therefore you always find the value "0" for the number of modules
in the I/O configuration.
Table 55: WBM page „I/O Data"
Configuration summary
Entry
Number of modules on terminal bus 6
Number of modules in I/O
configuration
Button
[SAVE CONFIG]
I/O Mapping
Entry
Position
Module
Type
Assigned
Fieldbus
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Value (Example) Description
0
Description
With this button, the current status of the I/O configuration on
the local bus is read in, displayed and stored on the device.
Value (Example) Description
1 Position of the I/O module in the hardware
750-5xx Product number of the integrated I/O module
M001Ch1
M001Ch2
8DO I/O module type, e.g. 8DO (8 Channel Digital Output Module)
Fieldbus 1 Mapping via fieldbus 1
Number of I/O modules (hardware)
Number of I/O modules in the
I/O configuration (not relevant).
M = module, 001 = position 1, Ch1 = channel 1
M = module, 002 = position 2, Ch2 = channel 2