Characteristics Of The Ethernet/Ip Protocol Software; Eds File - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
11.2.3

Characteristics of the EtherNet/IP Protocol Software

The EtherNet/IP product classes are divided into 4 levels with each level
containing a particular functionality. Each higher level in turn possesses at least
the functionality of a lower level. The fieldbus coupler supports levels 1 and 2 of
the EtherNet/IP product classes, which immediately build on each other.
Level 2
Level 1
• Unconnected Message Manager (UCMM) client and server
• 38 "Encapsulation Protocol Sessions"
• 6 Class 3 Connections ("Explicit Message")
• 3 Class 1 Connections ("Implicit Message")
11.2.4

EDS File

The "Electronic Data Sheets" file (EDS file for short) contains the characteristics
of the fieldbus coupler/controller and information regarding its communication
capabilities. The EDS file required for EtherNet/IP operation is imported and
installed by the corresponding configuration software.
Downloading the EDS file!
You can download the EDS file in the download area of the WAGO web site:
http://www.wago.com.
Information about installing the EDS file
When installing the EDS file, refer to the information provided in the
documentation of the configuration software, which you are using.
Level 2: Level 1 + I/O Messages Server
Level 1: Explicit Messages Server
Fieldbus Communication 165
Version 1.0.0
Manual