Removing The I/O Module; Figure 37: Snap The I/O Module Into Place (Example); Figure 38: Removing The I/O Module (Example) - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Figure 37: Snap the I/O Module into Place (Example)

With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or
to the previous or possibly subsequent I/O module are established.
5.6.4

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 38: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Mounting 81
Manual
Version 1.0.0