WAGO 750-363/0040-0000 Manual page 101

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
6. Enter the required IP Address and, if applicable, the address of the subnet
mask and gateway.
7. Click on the [Write] button to apply the settings in the fieldbus node.
8. You can now close "WAGO Ethernet Settings" or make other changes in
the Web-based Management System as required. To open the Web-based
Management System click on the button [Start WBM] on the right side.
Commissioning 101
Manual
Version 1.0.0