Notes About This Documentation; Validity Of This Documentation; Copyright - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
1

Notes about this Documentation

Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation
is included, if necessary.
1.1

Validity of this Documentation

This documentation is only applicable to the "FC EtherNet/IP G4 ECO XTR" (750-
363/0040-0000).
The device FC EtherNet/IP G4 ECO XTR 750-363/0040-0000 shall only be
installed and operated according to the instructions in this manual and the
system description for the WAGO I/O SYSTEM 750 XTR.
Consider power layout of the WAGO I/O SYSTEM 750 XTR!
In addition to these operating instructions, you will also need the system
description "Design Notes /XTR – Guidelines and Recommendations for
Increasing Operational Safety", which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
1.2

Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Notes about this Documentation 9
Manual
Version 1.0.0