Class Overview; Table 85: Overview Cip Common Classes; Table 91: Message Router - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
11.2.5.2

Class Overview

CIP classes are included in the CIP specification of ODVA. They describe the
properties (Volume 1, "Common Industrial Protocol") of Ethernet and CAN
independent of their physical interface. The physical interface is described in a
separate specification. For EtherNet/IP, this is Volume 2 ("EtherNet/IP Adaptation
of CIP"), which describes the adaption of EtherNet /IP to CIP.
For this purpose, WAGO uses classes 01
which are described in Volume 1 ("Common Industrial Protocol").
Classes F5
CIP").
WAGO-specific classes listed in the overview table below are also available.
All CIP Common classes listed and the WAGO-specific classes listed below that
are described in detail in the following individual sections after a brief explanation
of the table headings in the object descriptions.

Table 85: Overview CIP Common Classes

Class
01
hex
02
hex
04
hex
06
hex
F5
hex
F6
hex
and F6 are supported from Volume 2 ("EtherNet/IP Adaptation of
hex hex
Fieldbus Communication 167
, 02 , 04 , 05 , 06
hex hex hex hex
Name
Identity
Message Router
Assembly
Connection Manager
TCP/IP Interface Object
Ethernet Link Object
and F4 ,
hex hex
Manual
Version 1.0.0