Coupler/Controller Configuration; Hex; Table 113: Ethernet Link; Table 114: Coupler/Controller Configuration - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Common Services
Table 113: Ethernet link (F6
Service code Service
01

hex

0E
hex
10
hex
Changes with service "Set_Attribute_Single" not directly effective!
Attributes (particularly the attributes 6 and 9) which were changed over the
service "Set_Attribute_Single", become only effective after the next Power-On-
Reset of the controller.

11.2.5.10 Coupler/Controller Configuration (64

The fieldbus coupler configuration class allows reading and configuration of some
important fieldbus/controller process parameters. The following listings explain in
details all supported instances and attributes.
Instance 0 (Class Attributes)

Table 114: Coupler/Controller configuration (64

Attribute ID
1
2
3
) – Common service
hex
Service-Name
available
Class Instance
Yes Yes Get_Attribute_All
Yes Yes Get_Attribute_Single Supplies contents of the appropriate attribute
No Yes Set_Attribute_Single
Acces Name Data type Description
s
Get Revision UINT
Get Max Instance UINT
Get Number of UINT
Instances
Fieldbus Communication 185
Description
Supplies contents of all attributes
Modifies an attribute value
)
hex
) – Class
hex
Revision of this object
Maximum number of
instances
Number of Instances
Default value
1 (0x0001)
1 (0x0001)
1 (0x0001)
Manual
Version 1.0.0