Power Jumper Contacts/Field Supply; Figure 26: Power Jumper Contacts; Table 15: Legend For Figure "Power Jumper Contacts - WAGO 750-363/0040-0000 Manual

54 Device Description
4.2.2

Power Jumper Contacts/Field Supply

The controller 750-363/0040-0000 is equipped with 2 self-cleaning power
contacts for transferring of the field-side power supply to down-circuit I/O
modules. These contacts are designed as spring contacts.

Figure 26: Power Jumper Contacts

Table 15: Legend for Figure "Power Jumper Contacts"

Contact
1
2
Do not exceed maximum values via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged and the permissible operating
temperature can be exceeded by higher current values.
When configuring the system, do not exceed the permissible maximum current
value. If there is a higher power requirement, you must use an additional supply
module to provide the field voltage.
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Type
Spring contact
Spring contact
WAGO-I/O-SYSTEM 750
Function
Potential feed-in (Uv) for field supply
Potential feed-in (0 V) for field supply