Sntp; Tcp/Ip; Table 52: Wbm Page "Sntp - WAGO 750-363/0040-0000 Manual

130 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9.13

SNTP

On the WBM page "SNTP", you can perform the settings for the "Simple Network
Time Protocol".
The SNTP client supports configuration of static time servers. Two additional
servers may be assigned by dynamic network configuration (e. g. DHCP or
BootP). The selection of the active time server used to synchronize the current
time is done automatically by the SNTP client. The SNTP client queries all time
servers listed below and determines the most precise server to synchronize the
device clock with. This takes into account whether the respective time server can
be reached and how short the transmission distance between the time server and
the SNTP client is.

Table 52: WBM Page "SNTP"

SNMP Settings
Entry
Protocol status
Active time server
SNTP Client Settings
Entry
Server update
interval [s]
(60 ... 65535 s)
First time server
Second time server
Additional time
servers
9.14

TCP/IP

You can configure network addressing and network identification on the "TCP/IP"
WBM page.
Set the DIP switch to "0" and enable static IP configuration source!
Before you change parameters on this page, set the DIP switch to value "0" and
enable the option "IP configuration source static"!
If these conditions are not met, the DIP switch settings are applied instead.
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Value (Example) Description
Display the protocol status.
enabled „enabled"
„disabled"
Hostname or IP address of the active time server,
de.pool.ntp.org
which is currently used to synchronize the time.
Value (Example) Description
Polling interval for sychronizing the device clock with
3600
the active time server.
Host name or IP address of the first user-defined time
de.pool.ntp.org
server.
Host name or IP address of the second user-defined
0.0.0.0
time server.
- List of up to 2 time servers dynamically allocated via
- BootP or DHCP.
SNTP protocol ist activated.
SNTP protocol ist deactivated.