Snmp V1/V2C; Table 50: Wbm Page "Snmp V1/V2 - WAGO 750-363/0040-0000 Manual

128 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9.12.1

SNMP v1/v2c

The SNMP version 1/2c represents a community message exchange. The
community name of the network community must thereby be specified.

Table 50: WBM Page "SNMP v1/v2"

SNMP Settings
Entry
Description
Physical location
Contact address
SNMP v1/v2c Manager Settings
Entry
Enable protocol
Local community
name
SNMP v1/v2c Trap Receiver 1 Settings
Entry
Trap receiver
Community name
Trap version
SNMP v1/v2c Trap Receiver 2 Settings
Entry
Trap receiver
Community name
Trap version
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Value (Default) Description
FC EtherNet/IP G4 Device description (sysDescription)
ECO XTR 750-
363/0040-0000
LOCAL Location of device (sysLocation)
support@wago.com E-mail contact address (sysContact)
Default value Description



public used community name
Default value Description
0.0.0.0 IP address of 1. used SNMP manager
public 1. Community name of the network community used
v1
 
v1
v2
v1


Default value Description
0.0.0.0 IP address of 2. used SNMP manager
public 2. Community name of the network community used
v1
 
v1
v2
v1


Activating SNMP Version 1/2c
Deactivating SNMP-Version 1/2c
Activating Traps Version 1
v2

v2 Activating Traps Version 2

Activating Traps Version 1
v2

v2 Activating Traps Version 2
