Table 67: Blink Code Table For I/O Led Signaling, Error Code 12; Table 68: Blink Code Table For I/O Led Signaling, Error Code 13 - WAGO 750-363/0040-0000 Manual

WAGO-I/O-SYSTEM 750
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR

Table 67: Blink code table for I/O LED signaling, error code 12

Error code 12 "System Error"
Error
Argument
1
2
3

Table 68: Blink code table for I/O LED signaling, error code 13

Error code 13 – not used -
Error
Argument
-
Error description
General error of the
operating system
General error of the file
system
Insufficient system
memory
Error description
Not used
Solution
1. Restart the fieldbus node by turning the power supply
off and on again.
3. If the error still exists, please contact the I/O Support.
1. Reset the file system using "WAGO Ethernet Settings",
button [Reset File System] in the menu above.
2. Restart the fieldbus node by turning the power supply
off and on again.
3. If the error still exists, please contact the I/O Support.
1. Restart the fieldbus node by turning the power supply
off and on again.
2. If the error still exists, please contact the I/O Support.
Solution
-
Diagnostics 145
Manual
Version 1.0.0