Clock - WAGO 750-363/0040-0000 Manual

118 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9.6

Clock

On the WBM "Clock" page, you make settings for the internal system time. Enter
the current time and date here and select a time zone deviation, 12h or 24h
display and automatic daylight saving time as required.
At start-up, the system time has to be synchronized with the computer's current
time.
System time will be reset when the controller is de-energized!
The head station 750-363/0040-0000 does not have a real-time clock. For this
reason, the current system time will be reset when the controller is de-energized!
After switching on the operating voltage, the system time starts at 01/01/2000
00:00:00 a.m. and has to synchronize with the computer's current time.
Use a WAGO RTC module for time synchronization!!
You can use a WAGO 750-640 RTC Module for your node to utilize the actual
encoded time (Real-time – RTC) in your higher-level control system.
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR