Ethernet; Table 48: Wbm Page „Ethernet - WAGO 750-363/0040-0000 Manual

122 Configuring via the Web-Based Management System (WBM) WAGO-I/O-SYSTEM 750
9.10

Ethernet

Use the "Ethernet" WBM page to set the data transfer rate, the MAC address
filter settings and bandwidth limit for each of the two switch ports for data transfer
via Ethernet.
Table 48: WBM Page „Ethernet"
PHY Settings
Entry
Enable port
Enable auto-
negotiation
10 MBit Half Duplex
10 MBit Full Duplex
100 MBit Half Duplex
100 MBit Full Duplex
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
Default value Description
Enable Port X1/Port X2


 Disable Port X1/Port X2
Enable Autonegotiation for Port X1/Port X2.

Automatically handling the best possible transmission

mode and baud rate with the communication partner.
 Enable Autonegotiation for Port X1/Port X2.


Use a fixed transmission mode and baud rate for
Port X1/Port X2.

