Process Data Architecture For Ethernet/Ip - WAGO 750-363/0040-0000 Manual

202 I/O Modules
12.2

Process Data Architecture for EtherNet/IP

With some I/O modules, the structure of the process data is fieldbus specific.
In the case of a fieldbus controller with EtherNet/IP, the process image uses a
word structure (with word alignment). The internal mapping method for data
greater than one byte conforms to the Intel format.
The following section describes the process image for various WAGO-I/O-
SYSTEM 750 and 753 I/O modules when using a fieldbus coupler with
EtherNet/IP.
Equipment damage due to incorrect address!
To prevent any damage to the device in the field, you must always take the
process data for all previous byte or bit-oriented I/O modules into account when
addressing an I/O module at any position in the fieldbus node.
Manual
Version 1.0.0
750-363/0040-0000 FC EtherNet/IP G4 ECO XTR
WAGO-I/O-SYSTEM 750