90
Commissioning
8.3.3
Description of the Call Options
The WAGO Safety Editor can be started with various call versions. Depending on
the call option, the Safety Editor is started in either ONLINE or OFFLINE mode.
In ONLINE mode, different communication media are available (serial
connection, TCP/IP connection, fieldbus connection)
Do not change the selected F I/O module or communication connection if
an application is open!
Changing the F I/O module to be parameterized or communication connection is
currently not possible at runtime of the Safety Editor. If you want to parameterize
a different F I/O module or you want to change the communication connection,
close and restart the Safety Editor.
Instances of the Safety Editor
In ONLINE mode, only one instance of the Safety Editor can be open. In
OFFLINE mode, as many instances of the Safety Editor as you want can be
open.
8.3.3.1
Indirect Start via WAGO-I/O-CHECK from the Operating System
In the Windows Start menu, select the entry Programs WAGO Software
WAGO-I/O-CHECK WAGO-I/O-CHECK 3.
Select an F I/O module for parameterization from the displayed fieldbus node
configuration. Execute the Settings command in the WAGO-I/O-CHECK in the
context menu of the F I/O module (node view or navigation). WAGO-I/O-CHECK
then starts WAGO Safety Editor 75x with the current language and
communication settings. The Safety Editor is started in ONLINE mode.
Communication occurs over the serial connection for a PROFIBUS fieldbus
coupler and over the serial connection or ETHERNET for a PROFINET fieldbus
coupler depending on the current communication setting in WAGO-I/O-CHECK.
8.3.3.2
Direct Start from the Operating System
In the Windows Start menu, select the entry Programs WAGO Software
WAGO-I/O-CHECK 3 WAGO-Safety-Editor 75x.
The Safety Editor is started in OFFLINE mode.
Manual
Version 1.4.2, valid from HW/SW Version 01/02
750-667/000-003 4FDI/4FDO 24V/2A PROFIsafe V2 iPar
WAGO-I/O-SYSTEM 750