Setting Up A Dhcp Site-Specific Option Number - Avaya Vantage K175 Installing And Administering

Device configuration

Setting up a DHCP site-specific option number

About this task
Use this procedure to assign a Site-Specific Option Number (SSON). Avaya Vantage
SSON to determine which set of site-specific parameters must be downloaded from the DHCP
server. You can only set the SSON using the Settings menu of Avaya Vantage
Procedure
1. On the Home screen, tap Applications.
2. Tap Settings.
3. Tap More > DHCP Site-Specific Option Number (SSON).
4. Enter the required SSON.
The number must be in a range between 128 to 254.
Additional network configuration
Setting the Ethernet interface control
Procedure
1. Open the Settings menu.
2. Tap Network > Ethernet.
3. Tap Interfaces.
4. (Optional) If the interface options are disabled, enable the administrator mode.
5. To view the Ethernet mode, tap Ethernet.
The Ethernet mode is set to auto negotiation and cannot be modified.
6. To configure the secondary Ethernet interface, tap PC Ethernet and select one of the
following:
• Disabled: To disable the PC Ethernet interface.
• Auto: To enable and configure the PC Ethernet mode to auto negotiation.
Setting the 802.1x authentication mode
Procedure
1. Open the Settings menu.
2. Tap Network > Ethernet.
3. Tap IEEE 802.1x authentication.
You might need to enter the administrator password.
September 2018 Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
™
uses
™
.
™
72