GE Ecomagination AF-600 FP Programming Manual page 98

Parameter Description
DN-31 Store Data Values
Option: Function:
Parameter values changed via DeviceNet are not
automatically stored in non-volatile memory. Use
this parameter to activate a function that stores
parameter values in the EEPROM non-volatile
memory, so changed parameter values are
retained at power-down.
[0] Off Deactivates the non-volatile storage function.
*
[1] Store edit Stores all parameter values from the active set-
setup up in the non-volatile memory. The selection
returns to [0] Off when all values have been
stored.
[2] Store all Stores all parameter values for all set-ups in the
setups non-volatile memory. The selection returns to [0]
Off when all parameter values have been stored.
DN-32 Devicenet Revision
Range: Function:
0 [0 - 65535] View the DeviceNet revision number. This
*
parameter is used for EDS file creation.
DN-33 Store Always
Option: Function:
[0] Off Deactivates non-volatile storage of data.
*
[1] On Stores parameter data received via DeviceNet MCA 104
in EEPROM non-volatile memory as default.
DN-34 DeviceNet Product Code
Range:
120 [0 - 65535]
*
DN-39 Devicenet F Parameters
Array [1000].
No keypad access.
Range: Function:
0 [0 - 0] This parameter is used to configure the frequency
*
converter via DeviceNet MCA 104 and build the
EDS file.
DET-620D
AF-600 FP™ Programming Guide
Function:
03/2016 All rights reserved.
3 3
97