Table of Contents
Advertisement
How to Program
2.1.9 Changing a Text Value
If the selected parameter is a text value, change the text
2
2
value with the [
Place the cursor on the value that should be saved and
press [OK].
Illustration 2.24 Changing a Text Value
2.1.10 Changing a Group of Numeric Data
Values
If the selected parameter represents a numeric data value,
change the data value pressing the [
as well as the [
move the cursor horizontally.
Illustration 2.25 Changing a Group of Numeric Data Values
▲
Press the [
] [
increases the data value, and [
Place the cursor on the value to save and press [OK].
22
▲
▼
] [
] keys.
◀
▶
] [
] navigation keys,
▲
▼
] [
] navigation keys. Press [
▼
] keys to change the data value. [
▼
] decreases the data value.
Illustration 2.26 Changing a Group of Numeric Data Values
2.1.11 Value, Step-by-step
Certain parameters can be changed step-by-step. This
applies to:
•
•
•
The parameters are changed both as a group of numeric
data values and as numeric data values that are infinitely
varying.
2.1.12 Read out and Programming of
◀
▶
] [
] keys to
Parameters are indexed when placed in a rolling stack.
Parameter ID-30 Alarm Log: Error Code to
parameter ID-33 Alarm Log: Date and Time contain a fault
log which can be read out. Select a parameter, press [OK],
and use the [▲]/[▼] navigation keys to scroll through the
value log.
Use parameter C-05 Multi-step Frequency 1 - 8 as another
example:
Select the parameter, press [OK], and use the [▲]/[▼]
navigation keys to scroll through the indexed values. To
change the parameter value, select the indexed value and
press [OK]. To change the value, press the [▲]/[▼] keys.
Press [OK] to accept the new setting. Press [Cancel] to
abort. Press [Back] to leave the parameter.
▲
]
03/2016 All rights reserved.
Parameter P-07 Motor Power [kW].
Parameter F-05 Motor Rated Voltage.
Parameter F-04 Base Frequency.
Indexed Parameters
DET-620D
Advertisement
Chapters
Table of Contents
