GE Ecomagination AF-600 FP Programming Manual page 185

Parameter Description
LC-01 Start Event
Option:
[20] Alarm (trip)
[21] Alarm (trip lock)
3 3
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input
DI18
[34] Digital input
DI19
[35] Digital input
DI27
[36] Digital input
DI29
[37] Digital input
DI32
[38] Digital input
DI33
[39] Start command
*
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
184
Function:
See parameter group E-2# for further
description.
See parameter group E-2# for further
description.
Use the result of comparator 0 in the
logic rule.
Use the result of comparator 1 in the
logic rule.
Use the result of comparator 2 in the
logic rule.
Use the result of comparator 3 in the
logic rule.
Use the result of logic rule 0 in the
logic rule.
Use the result of logic rule 1 in the
logic rule.
Use the result of logic rule 2 in the
logic rule.
Use the result of logic rule 3 in the
logic rule.
Use the value of DI18 in the logic rule
(High = TRUE).
Use the value of DI19 in the logic rule
(High = TRUE).
Use the value of DI27 in the logic rule
(High = TRUE).
Use the value of DI29 in the logic rule
(High = TRUE).
Use the value of DI32 in the logic rule
(High = TRUE).
Use the value of DI33 in the logic rule
(High = TRUE).
This event is TRUE if the frequency
converter is started (either via digital
input, fieldbus, or other).
This event is TRUE if the frequency
converter is stopped or coasted (either
via digital input, fieldbus, or other).
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and [Reset] is pressed.
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and an automatic reset is
issued.
This event is TRUE if [OK] is pressed.
03/2016 All rights reserved.
LC-01 Start Event
Option: Function:
[44] Reset Key This event is TRUE if [Reset] is pressed.
[45] Left Key This event is TRUE if [◄] is pressed.
[46] Right Key This event is TRUE if [►] is pressed.
[47] Up Key
This event is TRUE if [
[48] Down Key
This event is TRUE if [
[50] Comparator 4 Use the result of comparator 4 in the
logic rule.
[51] Comparator 5 Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5 Use the result of logic rule 5 in the
logic rule.
[76] Digital Input x30
2
[77] Digital Input x30
3
[78] Digital Input x30
4
[90] ECB Drive Mode
[91] ECB Bypass
Mode
[92] ECB Test Mode
[100] Fire Mode See parameter LC-15 RS-FF Operand S,
parameter LC-16 RS-FF Operand R.
LC-02 Stop Event
Option: Function:
Select the boolean (TRUE or FALSE)
input to deactivate logic control.
[0] False Enters the fixed value of FALSE in the
logic rule.
[1] True Enters the fixed value TRUE in the logic
rule.
[2] Running See parameter group E-2# for further
description.
[3] In range See parameter group E-2# for further
description.
[4] On reference See parameter group E-2# for further
description.
[5] Torque limit See parameter group E-2# for further
description.
[6] Current Limit See parameter group E-2# for further
description.
[7] Out of current See parameter group E-2# for further
range description.
▲
] is pressed.
▼
] is pressed.
DET-620D