GE Ecomagination AF-600 FP Programming Manual page 68

Parameter Description
3.6.6 H-7# Adjustable Warnings
H-70 Warning Current Low
Range: Function:
0 [0 - Warnings are shown on the display, programmed
A par. output, or fieldbus.
*
H-71
A]
Illustration 3.25 Low Current Limit
Enter the I value. When the motor current drops
LOW
below this limit (I
The signal outputs can be programmed to produce
a status signal on terminal 27 or 29, and on relay
output 01 or 02. Refer to Illustration 3.25.
H-71 Warning Current High
Range: Function:
par. [par. H-70 Enter the I
DR-37 A - par. current exceeds this limit (I
*
DR-37 A] display reads Current high. The signal
outputs can be programmed to produce
a status signal on terminal 27 or 29, and
on relay output 01 or 02. Refer to
Illustration 3.25.
H-72 Warning Speed Low
Range: Function:
0 RPM [0 - par. Enter the n
*
LOW
H-73 drops below this limit (n
RPM] reads Speed Low. The signal outputs can be
programmed to produce a status signal on
terminal 27 or 29, and on relay output 01 or
02. Program the lower signal limit of the
motor speed, n
range of the frequency converter. Refer to the
Illustration 3.25.
DET-620D
AF-600 FP™ Programming Guide
), the display reads Current low.
LOW
value. When the motor
HIGH
), the
HIGH
value. When the motor speed
), the display
LOW
, within the normal working
LOW
03/2016 All rights reserved.
H-73 Warning Speed High
Range: Function:
NOTICE
3600 [par.
RPM H-72 -
*
Any changes in parameter F-17 Motor
60000
Speed High Limit [RPM] reset the value in
RPM]
parameter H-73 Warning Speed High to
the same value as set in
parameter F-17 Motor Speed High Limit
[RPM].
If a different value is needed in
parameter H-73 Warning Speed High, it
must be set after programming of
parameter F-17 Motor Speed High Limit
[RPM].
Enter the n
HIGH
exceeds this limit (n
Speed high. The signal outputs can be
programmed to produce a status signal on
terminal 27 or 29, and on relay output 01 or
02. Program the upper signal limit of the
motor speed, n
range of the frequency converter. Refer to
Illustration 3.25.
H-74 Warning Reference Low
Range:
-999999.999 [-999999.999 -
*
par. H-75]
H-75 Warning Reference High
Range: Function:
999999.999 [par. H-74 - Enter the upper reference limit.
*
999999.999] When the actual reference exceeds
this limit, the display reads Ref
The signal outputs can be
programmed to produce a status
signal on terminal 27 or 29, and
on relay output 01 or 02.
value. When the motor speed
), the display reads
HIGH
, within the normal working
HIGH
Function:
Enter the lower reference limit.
When the actual reference drops
below this limit, the display
indicates Ref . The signal
Low
outputs can be programmed to
produce a status signal on
terminal 27 or 29, and on relay
output 01 or 02.
.
High
67
3 3