GE Ecomagination AF-600 FP Programming Manual page 188

Fan & pump drive
Table of Contents

Advertisement

Parameter Description
LC-10 Comparator Operand
Array [6]
Option:
[52]
Control ready
[53]
Drive ready
[54]
Running
[55]
Reversing
[56]
In range
[60]
On reference
[61]
Below reference, low
[62]
Above ref, high
[65]
Torque limit
[66]
Current Limit
[67]
Out of current range
[68]
Below I low
[69]
Above I high
[70]
Out of speed range
[71]
Below speed low
[72]
Above speed high
[75]
Out of feedback range
[76]
Below feedback low
[77]
Above feedback high
[80]
Thermal warning
[82]
Mains out of range
[85]
Warning
[86]
Alarm (trip)
[87]
Alarm (trip lock)
[90]
Bus OK
[91]
Torque limit & stop
[92]
Brake fault (IGBT)
[93]
Mech. brake control
[94]
Safe stop active
[100] Comparator 0
[101] Comparator 1
[102] Comparator 2
[103] Comparator 3
[104] Comparator 4
[105] Comparator 5
[110] Logic rule 0
[111] Logic rule 1
[112] Logic rule 2
[113] Logic rule 3
[114] Logic rule 4
[115] Logic rule 5
[120] Logic Controller Time-out 0
[121] Logic Controller Time-out 1
[122] Logic Controller Time-out 2
[123] Logic Controller Time-out 3
[124] Logic Controller Time-out 4
[125] Logic Controller Time-out 5
[126] Logic Controller Time-out 6
[127] Logic Controller Time-out 7
[130] Digital input DI18
[131] Digital input DI19
DET-620D
AF-600 FP™ Programming Guide
LC-10 Comparator Operand
Array [6]
Function:
Option:
[132] Digital input DI27
[133] Digital input DI29
[134] Digital input DI32
[135] Digital input DI33
[150] Logic Controller digital output A
[151] Logic Controller digital output B
[152] Logic Controller digital output C
[153] Logic Controller digital output D
[154] Logic Controller digital output E
[155] Logic Controller digital output F
[160] Relay 1
[161] Relay 2
[180] Local referecnce active
[181] Remote reference active
[182] Start command
[183] Drive stopped
[185] Drive in hand mode
[186] Drive in auto mode
[187] Start command given
[190] Digital input x30/2
[191] Digital input x30/3
[192] Digital input x30/4
[205] No Flow
[206] Dry Pump
[207] End of Curve
[208] Broken Belt
[212] Fire Mode
LC-11 Comparator Operator
Array [6]
Option:
[0]
[1]
[2]
[5]
03/2016 All rights reserved.
Function:
<
Select [0] < for the result of the evaluation to
be TRUE, when the variable selected in
parameter LC-10 Comparator Operand is smaller
than the fixed value in
parameter LC-12 Comparator Value. The result is
FALSE, if the variable selected in
parameter LC-10 Comparator Operand is greater
than the fixed value in
parameter LC-12 Comparator Value.
≈ (equal)
Select [1] ≈ for the result of the evaluation to
*
be TRUE, when the variable selected in
parameter LC-10 Comparator Operand is approxi-
mately equal to the fixed value in
parameter LC-12 Comparator Value.
>
Select [2] > for the inverse logic of option [0] <.
TRUE
longer
than..
Function:
3
187
3

Advertisement

Table of Contents
loading

Table of Contents