GE Ecomagination AF-600 FP Programming Manual page 192

Parameter Description
3.25.6 LC-5# States
LC-51 Logic Controller Event
Array [20]
Option:
[0] False
*
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Line voltage out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] Logic Controller Time-out 0
[31] Logic Controller Time-out 1
[32] Logic Controller Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
DET-620D
AF-600 FP™ Programming Guide
Function:
Select the boolean input
(TRUE or FALSE) to define the
logic controller event.
See parameter LC-02 Stop
Event for further descriptions
of options and their functions.
03/2016 All rights reserved.
LC-51 Logic Controller Event
Array [20]
Option:
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Time-out 3
[71] Logic Controller Time-out 4
[72] Logic Controller Time-out 5
[73] Logic Controller Time-out 6
[74] Logic Controller Time-out 7
[76] Digital Input x30 2
[77] Digital Input x30 3
[78] Digital Input x30 4
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
[90] ECB Drive Mode
[91] ECB Bypass Mode
[92] ECB Test Mode
[100] Fire Mode
[140] ATEX ETR cur. warning
[141] ATEX ETR cur. alarm
[142] ATEX ETR freq. warning
[143] ATEX ETR freq. alarm
LC-52 Logic Controller Action
Array [20]
Option: Function:
Select the action corresponding to the
LC event. Actions are executed when the
corresponding event (defined in
parameter LC-51 Logic Controller Event) is
evaluated as true. The following actions
are available for selection:
[0] Disabled
*
[1] No action
[2] Select set-up 1 Changes the active set-up
(parameter K-10 Active Set-up) to 1.
[3] Select set-up 2 Changes the active set-up
(parameter K-10 Active Set-up) to 2.
Function:
See parameter LC-15 RS-FF
Operand S,
parameter LC-16 RS-FF
Operand R.
191
3 3