GE Ecomagination AF-600 FP Programming Manual page 56

Parameter Description
Illustration 3.20 Jog Ramp Time
C-23 Quick Stop Decel Time
Enter the quick stop ramp time. This is the acceleration/
deceleration time between 0 RPM and the rated motor frequency
in parameter P-06 Base Speed. During ramping, the output current
must not exceed the current limit in parameter F-43 Current Limit.
Range:
20.00 s [1 - 3600 s]
*
3.4.3 C-3# Frequency Setting 2 and 3
C-30 Frequency Command 2
Option: Function:
NOTICE
This parameter cannot be adjusted
while the motor is running.
Select the reference input to be used for
nd
the 2
•
•
•
Define up to 3 different reference signals.
The sum of these reference signals defines
the actual reference.
[0] No function
[1] Analog Input
53
[2] Analog Input
54
[7] Pulse input 29
[8] Pulse input 33
[20] Digital Potenti-
*
ometer
DET-620D
AF-600 FP™ Programming Guide
Function:
reference signal:
Parameter F-01 Frequency Setting
1.
Parameter C-30 Frequency
Command 2.
Parameter C-34 Frequency
Command 3.
03/2016 All rights reserved.
C-30 Frequency Command 2
Option: Function:
[21] Analog input (OPCGPIO)
X30/11
[22] Analog input (OPCGPIO)
X30/12
[23] Analog Input (OPCAIO)
X42/1
[24] Analog Input (OPCAIO)
X42/3
[25] Analog Input (OPCAIO)
X42/5
[30] Ext. Closed
Loop 1
[31] Ext. Closed
Loop 2
[32] Ext. Closed
Loop 3
C-34 Frequency Command 3
Option: Function:
NOTICE
This parameter cannot be adjusted
while the motor is running.
Select the reference input to be used for
rd
the 3 reference signal:
•
Parameter F-01 Frequency Setting
1.
•
Parameter C-30 Frequency
Command 2.
•
Parameter C-34 Frequency
Command 3.
Define up to 3 different reference signals.
The sum of these reference signals defines
the actual reference.
[0] No function
*
[1] Analog Input
53
[2] Analog Input
54
[7] Pulse input 29
[8] Pulse input 33
[20] Digital Potenti-
ometer
[21] Analog input (OPCGPIO)
X30/11
[22] Analog input (OPCGPIO)
X30/12
[23] Analog Input (OPCAIO)
X42/1
[24] Analog Input (OPCAIO)
X42/3
3 3
55