GE Ecomagination AF-600 FP Programming Manual page 168

Parameter Description
3.23.2 XC-1# Ext. CL 1 Ref./Fb.
Illustration 3.58 Closed Loop 1 Ref/Feedback
XC-10 Ext. 1 Ref./Feedback Unit
Option: Function:
Select the unit for the reference and feedback.
[0]
[1] %
*
[5] PPM
[10] 1/min
[11] RPM
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23] m3/s
[24] m3/min
[25] m3/h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[75] mm Hg
[80] kW
[120] GPM
DET-620D
AF-600 FP™ Programming Guide
XC-10 Ext. 1 Ref./Feedback Unit
Option:
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125] ft3/s
[126] ft3/min
[127] ft3/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in2
[172] in WG
[173] ft WG
[174] in Hg
[180] HP
XC-11 Ext. 1 Minimum Reference
Range:
0 ExtPID1Unit
XC-12 Ext. 1 Maximum Reference
Range:
100
ExtPID1Unit
03/2016 All rights reserved.
Function:
Function:
[-999999.999 - par. Select the minimum
*
XC-12 ExtPID1Unit] reference for the closed-
loop 1 controller.
Function:
NOTICE
[par. XC-11 -
999999.999
*
Set the value for
ExtPID1Unit]
parameter XC-12 Ext. 1
Maximum Reference before
setting the values for the
PID controller in parameter
group CL-9#.
Select the maximum reference for
the closed-loop 1 controller.
The dynamics of the PID
controller depend on the value
set in this parameter. See also
parameter XC-21 Ext. 1 Propor-
tional Gain.
3 3
167