Main Menu Mode; Parameter Selection; Changing Data; Changing A Text Value - GE AF-650 GP Programming Manual

How to Program

2.1.8 Main Menu Mode

Start the Main Menu mode by pressing [Main Menu]. The
2 2
read-out shown below appears on the display.
The middle and bottom sections on the display show a list
of parameter groups which can be chosen by toggling [
▼
and [ ] keys.
Illustration 2.14 Main Menu Mode
Each parameter has a name and number which remain the
same regardless of the programming mode. In the Main
Menu mode, the parameters are divided into groups. The
first digit of the parameter number (from the left) indicates
the parameter group number.
All parameters can be changed in the Main Menu.
However, depending on the choice of configuration
(H-40 Configuration Mode), some parameters can be
"missing". E.g. open loop hides all the PID parameters, and
other enabled options make more parameter groups
visible.

2.1.9 Parameter Selection

In the Main menu mode, the parameters are divided into
groups. Select a parameter group with the navigation keys.
After selecting a parameter group, choose a parameter by
means of the navigation keys.
The middle section on the display shows the parameter
number and name as well as the selected parameter value.
Illustration 2.15 Parameter Selection
20
AF-650 GP Programming Guide

2.1.10 Changing Data

The procedure for changing data is the same in the Quick
menu and the Main menu mode. Press [OK] to change the
selected parameter.
▲
The procedure for changing data depends on whether the
]
selected parameter represents a numerical data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
value with the [
Place the cursor on the value to save and press [OK].
Illustration 2.16 Changing a Text Value

2.1.12 Changing

If the chosen parameter represents a numeric data value,
change the chosen data value by means of the [
navigation keys as well as the [
◀ ▶
[ ] [ ] keys to move the cursor horizontally.
Illustration 2.17 Changing a Data Value
▲
Press [
the data value, and [
cursor on the value to save and press [OK].
Illustration 2.18 Saving a Data Value
DET-618C
▲ ▼
] [ ] keys.
▲ ▼
] [ ] navigation keys. Press
▼
] [ ] keys to change the data value. [
▼
] decreases the data value. Place the
◀ ▶
] [ ]
▲
] increases