Environmental Sensor Information - LEGRAND Server Technology PRO3X User Manual

Environmental Sensor Information

This command syntax shows the environmental sensor's information.
show externalsensors <n>
#
To show detailed information, add the parameter "details" to the end of the command.
show externalsensors <n> details
#
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information of all environmental sensors.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information for the specified
environmental
environmental sensor only.
sensor number*
* The environmental sensor number is the ID number assigned to the sensor, which can be found on the Peripherals page of
the PRO3X web interface.
Displayed information:
Without the parameter details only the sensor ID, sensor type and reading are displayed.
Note: A state sensor displays the sensor state instead of the reading.
PRO3X User Guide – Command Line Interface (CLI)
20 of 182
Using the PRO3X Command Line Interface (CLI)