LEGRAND Server Technology PRO3X User Manual page 28

Environmental Sensor Default Thresholds
This command syntax shows a certain sensor type's default thresholds, which are the initial thresholds applying to the
specified type of sensor.
# show defaultThresholds <sensor type>
To show detailed information, add the parameter "details" to the end of the command.
# show defaultThresholds <sensor type> details
Variables:
<sensor type> is one of the following numeric sensor types:
Sensor types
absoluteHumidity
relativeHumidity
temperature
airPressure
airFlow
vibration
all
Displayed information:
Without the parameter details only the default upper and lower thresholds, de-assertion hysteresis and assertion timeout
settings of the specified sensor type are displayed.
With the parameter details the threshold range is displayed in addition to default thresholds settings.
Description
Absolute humidity sensors
Relative humidity sensors
Temperature sensors
Air pressure sensors
Air flow sensors
Vibration sensors
All of the above numeric sensors
Tip: You can also type the command without
adding this option "all" to get the same data.
PRO3X User Guide – Command Line Interface (CLI)
Using the PRO3X Command Line Interface (CLI)
28 of 182