LEGRAND Server Technology PRO3X User Manual page 58

Setting the Ethernet Authentication Method
This command sets the authentication method for the selected Ethernet interface to either none or Extensible Authentication
Protocol (EAP).
config:# network ethernet <ETH> authMethod <method>
Variables:
<ETH> is one of the options -- eth1 or eth2.
Option Description
eth1 ETH1 port
eth2 ETH2 port
<method> is one of the authentication methods: NONE or EAP.
Method Description
NONE The authentication method is set to NONE.
EAP The authentication method is set to EAP.
PRO3X User Guide – Command Line Interface (CLI)
58 of 182
Using the PRO3X Command Line Interface (CLI)