Reliability Data - LEGRAND Server Technology PRO3X User Manual

Reliability Data

This command shows the reliability data.
# show reliability data
Reliability Error Log
This command shows the reliability error log.
# show reliability errorlog <n>
Variables:
<n> is one of the options: 0 (zero) or any other integer number.
Option Description
0 Displays all entries in the reliability error log.
Tip: You can also type the command without adding
this option "0" to get all data.
A specific integer Displays the specified number of last entries in the
number reliability error log.
Reliability Hardware Failures
This command shows a list of detected hardware failures.
# show reliability hwfailures
PRO3X User Guide – Command Line Interface (CLI)
37 of 182
Using the PRO3X Command Line Interface (CLI)