LEGRAND Server Technology PRO3X User Manual page 88

IPv6 commands
Modify an IPv6 rule's IP address and/or prefix length:
security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask>
Modify an IPv6 rule's policy:
security ipAccessControl ipv6 rule modify <direction> <rule_number> policy
<policy>
Modify all contents of an IPv6 existing rule:
security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
Variables:
<direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.
<rule_number> is the number of the existing rule that you want to modify.
<ip_mask> is the combination of the IP address and subnet mask values (or prefix length), which are separated with a slash.
For example, an IPv4 combination looks like this: 192.168.94.222/24.
<policy> is one of the options: accept, drop or reject.
Option Description
accept Accepts traffic from/to the specified IP address(es).
Discards traffic from/to the specified IP address(es),
drop
without sending any failure notification to the source
or destination host.
reject Discards traffic from/to the specified IP address(es),
and an ICMP message is sent to the source or
destination host for failure notification.
PRO3X User Guide – Command Line Interface (CLI)
88 of 182
Using the PRO3X Command Line Interface (CLI)