LEGRAND Server Technology PRO3X User Manual page 86

IPv6 commands
Add a new rule to the bottom of the IPv6 rules list:
security ipAccessControl ipv6 rule add <direction> <ip_mask> <policy>
Add a new IPv6 rule by inserting it above or below a specific rule:
security ipAccessControl ipv6 rule add <direction> <ip_mask> <policy> <insert>
<rule_number>
-- OR --
security ipAccessControl ipv6 rule add <direction> <insert> <rule_number>
<ip_mask> <policy>
Variables:
<direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.
<ip_mask> is the combination of the IP address and subnet mask values (or prefix length), which are separated with a slash.
For example, an IPv4 combination looks like this: 192.168.94.222/24.
<policy> is one of the options: accept, drop or reject.
Policy Description
accept Accepts traffic from/to the specified IP address(es).
drop Discards traffic from/to the specified IP address(es),
without sending any failure notification to the source
or destination host.
reject Discards traffic from/to the specified IP address(es),
and an ICMP message is sent to the source or
destination host for failure notification.
PRO3X User Guide – Command Line Interface (CLI)
86 of 182
Using the PRO3X Command Line Interface (CLI)