LEGRAND Server Technology PRO3X User Manual page 102

Enabling or Disabling Front Panel Actuator Control
The following CLI commands control whether you can turn on or off connected actuator(s) by operating the front panel LCD
display.
To enable the front panel actuator control feature:
config:# security frontPanelPermissions add switchActuator
To disable the front panel actuator control feature:
config:# security frontPanelPermissions remove switchActuator
Tip: If your PRO3X supports multiple front panel permissions, you can combine them into one command by adding a semicolon
(;) between different permissions. For example, the following CLI command enables both front panel actuator control and the
internal beeper-muting functions simultaneously.
security frontPanelPermissions add switchActuator;muteBeeper
Enabling or Disabling Front Panel Beeper-Sound Control
The following CLI commands control whether you can mute the internal beeper by operating the front panel LCD display
when the beeper sounds.
To enable the front panel beeper sound control feature:
config:# security frontPanelPermissions add muteBeeper
To disable the front panel actuator control feature:
config:# security frontPanelPermissions remove muteBeeper
Tip: If your PRO3X supports multiple front panel permissions, you can combine them into one command by adding a semicolon
(;) between different permissions. For example, the following CLI command enables both front panel actuator control and the
the internal beeper-muting functions simultaneously.
security frontPanelPermissions add switchActuator;muteBeeper
PRO3X User Guide – Command Line Interface (CLI)
102 of 182
Using the PRO3X Command Line Interface (CLI)