LEGRAND Server Technology PRO3X User Manual page 119

Privilege
changeSecuritySettings
changeSnmpSettings
changeUserSettings
changeWebcamSettings
clearLog
firmwareUpdate
performReset
switchActuator*
viewAuthSettings
viewEventSetup
viewEverything
viewLog
viewSecuritySettings
viewSnmpSettings
viewUserSettings
viewWebcamSettings
* The "switchActuator" privilege requires an argument that is separated with a colon. The argument could be:
All actuators, that is,
switchActuator:all
An actuator's ID number. For example:
switchActuator:1
switchActuator:2
switchActuator:3
A list of comma-separated ID numbers of different actuators. For example:
switchActuator:1,3,6
Note: The ID number of each actuator is shown in the PRO3X web interface. It is an integer.
Description
Change Security Settings
Change SNMP Settings
Change Local User Management
Change Webcam Configuration
Clear Local Event Log
Firmware Update
Reset (Warm Start)
Switch Actuator
View Authentication Settings
View Event Settings
Unrestricted View Privileges
View Local Event Log
View Security Settings
View SNMP Settings
View Local User Management
View Webcam Snapshots and
Configuration
PRO3X User Guide – Command Line Interface (CLI)
119 of 182
Using the PRO3X Command Line Interface (CLI)