Enabling Or Disabling Peripheral Device Auto Management; Setting The Maximum Number Of Active Powered Dry Contact Actuators - LEGRAND Server Technology PRO3X User Manual

Option Description
freeForm Any alphanumeric string can be used for
specifying the Z coordinate.

Enabling or Disabling Peripheral Device Auto Management

This command enables or disables the Peripheral Device Auto Management feature.
config:# pdu peripheralDeviceAutoManagement <option>
Variables:
<option> is one of the options: enable or disable.
Option Description
enable Enables the automatic management feature for
environmental sensor packages.
disable Disables the automatic management feature for
environmental sensor packages.

Setting the Maximum Number of Active Powered Dry Contact Actuators

This command determines the upper limit of "active" powered dry contact actuators on one PRO3X device. You need either
'Change Peripheral Device Configuration' privilege or 'Administrator Privileges' to change its upper limit.
config:# pdu activePoweredDryContactLimit <number>
Variables:
<number> is the number representing the maximum number of active powered dry contact actuators. Its value ranges
between 0 to 24.
Note: An "active" actuator is the one that is turned ON, or, if with a door handle connected, is OPENED.
Examples
This section illustrates several PDU configuration examples.
PRO3X User Guide – Command Line Interface (CLI)
44 of 182
Using the PRO3X Command Line Interface (CLI)