LEGRAND Server Technology PRO3X User Manual page 23

Inlet Sensor Threshold Information
This command syntax shows the specified inlet sensor's threshold-related information.
# show sensor inlet <n> <sensor type>
To show detailed information, add the parameter "details" to the end of the command.
# show sensor inlet <n> <sensor type> details
Variables:
<n> is the number of the inlet whose sensors you want to query. For a single-inlet PDU, <n> is always 1.
<sensor type> is one of the following sensor types:
Sensor type
current
voltage
activePower
apparentPower
powerFactor
activeEnergy
unbalancedCurrent
lineFrequency
Displayed information:
Without the parameter details only the reading, state, threshold, de-assertion hysteresis and assertion timeout settings of
the specified inlet sensor are displayed.
With the parameter details more sensor information is displayed, including resolution and range.
If the requested sensor type is not supported, the "Sensor is not available" message is displayed.
Description
Current sensor
Voltage sensor
Active power sensor
Apparent power sensor
Power factor sensor
Active energy sensor
Unbalanced load sensor
Line frequency sensor
PRO3X User Guide – Command Line Interface (CLI)
23 of 182
Using the PRO3X Command Line Interface (CLI)