Actuator Information - LEGRAND Server Technology PRO3X User Manual

Actuator Information

This command syntax shows an actuator's information.
# show actuators <n>
To show detailed information, add the parameter "details" to the end of the command.
# show actuators <n> details
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all actuators.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information for the specified actuator
actuator only.
number*
* The actuator number is the ID number assigned to the actuator. The ID number can be found using the PRO3X web
interface or CLI. It is an integer starting at 1.
Displayed information:
Without the parameter details only the actuator ID, type and state are displayed.
With the parameter details more information is displayed in addition to the ID number and actuator state, such as the serial
number and X, Y, and Z coordinates.
PRO3X User Guide – Command Line Interface (CLI)
22 of 182
Using the PRO3X Command Line Interface (CLI)