LEGRAND Server Technology PRO3X User Manual page 145

Set the Lower Warning threshold for an overcurrent protector:
sensor ocp <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an overcurrent protector:
sensor ocp <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an overcurrent protector:
sensor ocp <n> <sensor type> assertionTimeout <as_value>
Variables:
<n> is the number of the overcurrent protector that you want to configure.
<sensor type> is one of the following sensor types:
Sensor type
current
Note: If the requested sensor type is not supported, the "Sensor is not available" message is displayed.
<option> is one of the options: enable, disable or a numeric value.
Option
enable
disable
A numeric value
<hy_value> is a numeric value that is assigned to the hysteresis for the specified overcurrent protector sensor.
<as_value> is a number in samples that is assigned to the assertion timeout for the specified overcurrent protector sensor.
Description
Current sensor
Description
Enables the specified threshold for the overcurrent
protector sensor.
Disables the specified threshold for the overcurrent
protector sensor.
Sets a value for the specified threshold of the
overcurrent protector sensor and enables this
threshold at the same time.
PRO3X User Guide – Command Line Interface (CLI)
Using the PRO3X Command Line Interface (CLI)
145 of 182