LEGRAND Server Technology PRO3X User Manual page 9

4. Type a name and press Enter. The name is case sensitive. Then you are prompted to enter a password.
5. Type a password and press Enter. The password is case sensitive.
After properly entering the password, the # or > system prompt appears.
Tip: The 'Last login' information, including the date and time, is also displayed if the same user account was used to log in
to this product's web interface or CLI.
6. You are now logged in to the command line interface and can begin administering this product.
With SSH or Telnet
You can remotely log in to the command line interface (CLI) using an SSH or Telnet client, such as PuTTY.
Note: PuTTY is a free program you can download from the Internet. Refer to PuTTY's documentation for details on
configuration.
To log in using SSH or Telnet:
1. Ensure SSH or Telnet has been enabled.
2. Launch an SSH or Telnet client and open a console window. A login prompt appears.
3. Type a name and press Enter. The name is case sensitive.
Note: If using the SSH client, the name must NOT exceed 25 characters. Otherwise, the login fails.
Then you are prompted to enter a password.
4. Type a password and press Enter. The password is case sensitive.
5. After properly entering the password, the # or > system prompt appears..
Tip: The 'Last login' information, including the date and time, is also displayed if the same user account was used to log in
to this product's web interface or CLI.
6. You are now logged in to the command line interface and can begin administering this product.
PRO3X User Guide – Command Line Interface (CLI)
9 of 182
Using the PRO3X Command Line Interface (CLI)