Variables:
<option> is one of the options: enable or disable.
Option
Description
enable
At least one special character is required.
disable
No special character is required.
Maximum Password History
This command determines the number of previous passwords that CANNOT be repeated when changing the password.
config:#
security strongPasswords passwordHistoryDepth <value>
Variables:
<value> is an integer between 1 and 12.
Role-Based Access Control
In addition to firewall access control based on IP addresses, you can configure other access control rules that are based on
both IP addresses and users' roles.
An IPv4 role-based access control command begins with security roleBasedAccessControl ipv4.
An IPv6 role-based access control command begins with security roleBasedAccessControl ipv6.
Modifying Role-Based Access Control Parameters
There are different commands for modifying role-based access control parameters.
IPv4 commands
Enable or disable the IPv4 role-based access control feature:
security roleBasedAccessControl ipv4 enabled <option>
Determine the IPv4 role-based access control policy:
security roleBasedAccessControl ipv4 defaultPolicy <policy>
PRO3X User Guide – Command Line Interface (CLI)
96 of 182
Using the PRO3X Command Line Interface (CLI)
Need help?
Do you have a question about the Server Technology PRO3X and is the answer not in the manual?